Firman WT05571 — Starting the Generator on Gasoline
Operation · Engine
For the Firman WT05571, from the Firman owner's manual.
Browse Firman generators & specs →
Before you start
- Never start or stop generator with electrical devices plugged in
Procedure
- Check for loose/missing parts and shipping damage; ensure spark plug, muffler, fuel cap, air cleaner in place
- Move generator outdoors, downwind, at least 20 feet from occupied spaces
- Disconnect all electrical loads
- Turn main fuel selector switch to GAS position
- Pull choke button to CHOKE position (not needed for warm engine)
- Recoil: pull starter cord slowly until resistance, then pull rapidly / Electric: flip engine switch to START for a few seconds
- As engine starts and warms up, press choke button to return to run position
- Allow to run at no load for a few minutes to stabilize before plugging in devices
Source: Firman owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.