Firman WH03662OF — Starting the Generator on LPG
Operation · Engine
For the Firman WH03662OF, from the Firman operator's manual.
Browse Firman generators & specs →
Before you start
- Observing frost on LPG cylinder/regulator is common and normally not a problem
Procedure
- Check for loose/missing parts and shipping damage
- Move generator outdoors, at least 20 ft (6 m) from occupied spaces
- Connect LPG hose with regulator to LPG cylinder and generator inlet
- Fully open the LPG cylinder knob
- Disconnect all electrical loads from the generator
- Turn main fuel selector switch to LPG position
- Pull choke knob to START position
- For recoil start, pull-to-prime the starter cord 1-2 times
- Move choke knob to RUN position
- Pull starter cord to run the generator, or flip electric start switch to START
- Allow generator to run at no load for a few minutes before plugging in devices
Source: Firman operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.