Firman WH03344 — Starting the Generator on LPG
Operation · Engine
For the Firman WH03344, from the Firman manual.
Browse Firman generators & specs →
Before you start
- LPG is extremely flammable.
- Keep fire extinguisher nearby.
- Check connections for leaks daily.
Procedure
- Check for loose or missing parts and any damage.
- Move generator outdoors to safe location at least 20 feet from occupied spaces.
- Connect LPG hose with regulator to cylinder and generator inlet.
- Fully open LPG cylinder knob.
- Disconnect all electrical loads.
- Turn fuel selector switch to LPG position.
- Flip engine switch to RUN position.
- Push battery power restore switch for 3 seconds.
- Pull choke knob to START position.
- Pull starter cord to prime.
- Move choke to RUN position.
- Allow generator to run and stabilize.
Source: Firman manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.