Firman WH03344 — Starting the Generator on Gasoline
Operation · Engine
For the Firman WH03344, from the Firman manual.
Browse Firman generators & specs →
Before you start
- Do not start with electrical devices plugged in.
- Keep away from enclosed spaces due to carbon monoxide.
Procedure
- Check for loose or missing parts and any damage from shipment.
- Move generator outdoors to safe location at least 20 feet from occupied spaces.
- Disconnect all electrical loads from generator.
- Turn fuel selector switch to GAS position.
- Flip engine switch to RUN position.
- Push battery power restore switch for 3 seconds.
- Pull choke knob to START position.
- Pull starter cord slowly until resistance, then pull rapidly.
- As engine starts, move choke knob to RUN position.
- Allow generator to run at no load for several minutes to stabilize.
Source: Firman manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.