Home›Repair guides›Firman›Spark Plug Maintenance

Firman T04073 — Spark Plug Maintenance

Maintenance

For the Firman T04073, from the Firman owner's manual.

Applies to: Firman T04073

Parts for this job

Part numbers from the service-parts list for Firman T04073. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. Remove spark plug boot
  2. Remove spark plug using provided wrench
  3. Inspect spark plug for damage and clean with wire brush before reinstalling, replace if damaged
  4. Adjust electrode gap to 0.020-0.024 in. (0.5-0.6mm)
  5. Seat spark plug in position and thread by hand to prevent cross threading
  6. Tighten plug with provided wrench and put spark plug boot back on

Tools required

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Specs & values

Full service-parts list: Firman T04073 →

Source: Firman owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Firman repair guides →