MP-5667 — Procedure 18

For the MP-5667.

Procedure

1. 2. Retaining clip
2. Figure 6-20. Contact Pole Removal
3. (145/150/180/245 Ampere Contactors)
4. 4. Using L-wrench, loosen screw and remove and
5. discard upper contact. See Figure 6-21.
6. 5. Repeating step 4, remove and discard lower
7. contact.
8. 6. Repeating steps 2 through 5, remove and discard
9. remaining poles and contacts.
10. 5667621
11. 1
12. 2

Source: manual:mp5667.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.