Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Procedure 14

MP-5667 — Procedure 14

For the MP-5667.

Before you start

  • NOTE

Procedure

  1. 3. Interlock
  2. 4. Contactor
  3. Figure 6-14. Mechanical Interlock Installation
  4. (145-400 Ampere Contactors)
  5. 2. Install washer and capscrew. Torque capscrew to
  6. 40 in. lbs. (4.5 Nm).
  7. 3. Install previously removed contactor on contactor
  8. assembly panel. See Contactor Installation,
  9. steps 4 through 8, earlier in this section.
  10. NOTE
  11. Use
  12. L-wrench
  13. or
  14. manual
  15. operator

Tools required

  • L-wrench

Specs & torque values

  • 4.5 Nm

Source: manual:mp5667.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.