MP-5667 — Procedure 3
For the MP-5667.
Procedure
- 1. Interlock
- 2. Contactor
- Figure 6-3. Mechanical Interlock Removal
- (25-80 Ampere Contactors)
- Mechanical Interlock Installation
- 1. Engage tab of mechanical interlock into slot of
- contactor
- that
- is
- still
- attached
- to
- contactor
- assembly panel. See Figure 6-4.
- 2. Install other contactor, mating its slot with tab on
Source: manual:mp5667.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.