Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Adjustment must be made with the bimetal at ambient

RJC — Adjustment must be made with the bimetal at ambient

For the RJC.

Procedure

  1. Lead tagged G goes to ground terminal on coil
  2. Lead tagged H goes to either of the H1 terminals on
  3. CAlwREToR INLETVALVE

Specs & torque values

  • from 1/8 inch inside choke housing to flush with inside

Source: manual:967-0757_Onan_RJC_MJB_MJC_Gas_Engine_Service_Manual_11-1986.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.