MP-5667 — MP-5667

For the MP-5667.

Procedure

1. 2. Repeat step 1 to install new contacts for remainder
2. of the contact set.
3. 3. If contactor is rated at 400 amperes, slide pole into
4. pole retainer, install rear retaining pin, and then
5. install front retaining pin. See Figure 6-24.
6. 5667623
7. 1
8. 2
9. 3
10. 1. Rear retaining pin

Source: manual:mp5667.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.