MP-5667 — Figure 6-18. Coil Installation

For the MP-5667.

Procedure

1. 2. Retaining clip
2. Figure 6-19. Contact Pole Removal
3. (400 Ampere Contactors)
4. 6-8
5. Reassembly/Disassembly
6. MP-5667
7. 9/96
8. 3. If contactor is not rated at 400 amperes, remove
9. pole (Figure 6-20) as follows:
10. a. Push and hold lower portion of pole inward.
11. b. Press top of pole downward into retaining clip.
12. c. Rotate lower portion of pole outward and
13. remove and discard pole.
14. 5667620
15. 1
16. 2
17. a.
18. b.
19. c.

Source: manual:mp5667.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.