MP-5667 — Figure 6-18. Coil Installation

For the MP-5667.

Procedure

1. 1. Loosen captive quarter-turn fasteners and remove
2. contactor cover.
3. 2. If contactor is rated at 400 amperes, pull pole
4. outward, locate and remove retaining pin, and then
5. remove and discard pole. See Figure 6-19.
6. 5667619
7. 1
8. 2

Source: manual:mp5667.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.