DuroMax XP9000IH — Changing the Oil
Maintenance · Engine
For the DuroMax XP9000IH, from the DuroMax owner's manual.
Browse DuroMax generators & specs →
Procedure
- Remove oil drain covers.
- Using a 12mm hex wrench, unscrew the oil drain plug located on the crankcase underneath the oil filler/dipstick cap.
- Allow all oil to drain into an approved oil disposal container.
- Replace and tighten the oil drain plug with the 12mm hex wrench.
Tools required
- 12mm hex wrench Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Source: DuroMax owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.