Home›Repair guides›DuroMax›Starting the Generator Using Recoil Start

DuroMax XP5500HX — Starting the Generator Using Recoil Start

Operation · Engine

For the DuroMax XP5500HX, from the DuroMax owner's manual.

Browse DuroMax generators & specs →

Before you start

  • Release the recoil handle only after the cord has retracted

Procedure

  1. Shut breaker OFF
  2. Select your fuel (gas or propane steps)
  3. Turn engine switch to RUN
  4. Close choke
  5. Pull the recoil start
  6. Open choke as engine warms up
  7. Turn breaker ON/Connect devices

Source: DuroMax owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More DuroMax repair guides →