Home›Repair guides›DuroMax›Starting the Generator Using Propane

DuroMax XP5500HX — Starting the Generator Using Propane

Operation · Engine

For the DuroMax XP5500HX, from the DuroMax owner's manual.

Browse DuroMax generators & specs →

Before you start

  • Make sure there is no possible ignition source close to the generator

Procedure

  1. Turn breaker OFF
  2. Turn the gas valve OFF
  3. Connect propane hose
  4. Connect propane tank
  5. Press engine switch up to START position
  6. Close choke
  7. Open choke as engine warms up
  8. Turn breaker ON/Connect devices

Source: DuroMax owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More DuroMax repair guides →