Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›DuroMax›Changing/Inspecting the Carbon Brushes

DuroMax XP5500HX — Changing/Inspecting the Carbon Brushes

Repair & overhaul · Alternator

For the DuroMax XP5500HX, from the DuroMax owner's manual.

Browse DuroMax generators & specs →

Procedure

  1. Remove the 2 bolts of the generator cover then pull the cover off
  2. Remove the bolt holding the carbon brush
  3. Remove the two wires from the AVR on the carbon brush
  4. Install new carbon brush with bolt
  5. Insert and connect the 2 wires from the AVR, connecting + and - correctly
  6. Replace the back cover of the generator and secure with 2 bolts

Specs & values

  • Inspect every 250 running hours

Source: DuroMax owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More DuroMax repair guides →