Home›Repair guides›DuroMax›Starting the Generator Using Gasoline

DuroMax XP5500EH — Starting the Generator Using Gasoline

Operation · Engine

For the DuroMax XP5500EH, from the DuroMax owner's manual.

Browse DuroMax generators & specs →

Before you start

  • Operating starter motor more than 5 seconds can damage motor; wait 10 seconds before retrying

Procedure

  1. Shut breaker OFF
  2. Turn gas valve ON (rotate counter-clockwise to vertical)
  3. Close choke (slide lever left)
  4. Press engine switch to START position
  5. Allow switch to return to RUN position when engine starts
  6. Open choke as engine warms up

Source: DuroMax owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More DuroMax repair guides →