DuroMax XP2300IH — Storage Preparation (over 30 days)
Maintenance · whole unit
For the DuroMax XP2300IH, from the DuroMax owner's manual.
Browse DuroMax generators & specs →
Procedure
- Turn off the main breaker
- Allow the unit to run 3-5 minutes
- Turn off the fuel valve
- Allow the unit to stall out
- Turn off the start switch
- Drain the fuel tank
- Remove the drain bolt from the carburetor and drain remaining fuel
- Remove the spark plug and put 2 tbsp of 10w30 motor oil into the spark plug hole
- Pull the recoil start one time
- Replace the plug
- Remove the battery and place on tender indoors
Specs & values
- 2 tbsp. of 10w30 Amazon eBay $54.99 motor oil
Source: DuroMax owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.