DuroMax XP2300IH — Spark Plug Maintenance
Maintenance · ignition
For the DuroMax XP2300IH, from the DuroMax owner's manual.
Browse DuroMax generators & specs →
Procedure
- Pull on the spark plug cap to remove it
- Unscrew the spark plug using the included spark plug wrench
- Visually inspect the spark plug; discard and replace if cracked or chipped
- Measure the plug gap with a gauge (0.7-0.8 mm / 0.028-0.031 in)
- Clean and re-gap if reusing, using a wire brush
- Screw the spark plug back in using the spark plug wrench
- Replace the spark plug cap
Tools required
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Gap 0.7-0.8 mm (0.028-0.031 in)
- Recommended: F6RTC / NGK BPR6ES
Source: DuroMax owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.