DuroMax XP15000HXT — Changing the Oil
Maintenance · engine
For the DuroMax XP15000HXT, from the DuroMax owner's manual.
Browse DuroMax generators & specs →
Before you start
- Worn out or dirty oil does not cool generator properly
Procedure
- Using 16 mm hex wrench, unscrew oil drain plug located on crankcase
- Drain oil into approved container
- Unscrew old oil filter, install new filter with oil on gasket
- Replace drain plug and tighten with 16 mm hex wrench
- Add 57.5 fl. oz of new oil
Tools required
- 16 mm hex wrench Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- 57.5 fl. oz new oil
Source: DuroMax owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.