DuroMax XP15000HXT — Changing/Inspecting the Carbon Brushes

Repair & overhaul · alternator

For the DuroMax XP15000HXT, from the DuroMax owner's manual.

Browse DuroMax generators & specs →

Procedure

1. Remove 2 bolts of generator cover then pull cover off
2. Remove bolts holding carbon brush
3. Remove 2 wires from AVR on carbon brush
4. Install new carbon brush with bolt
5. Connect AVR wires, + and - correctly
6. Replace generator cover and secure with 2 bolts

Source: DuroMax owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More DuroMax repair guides →