DuroMax XP11000iH — Spark Plug Maintenance

Maintenance

For the DuroMax XP11000iH, from the DuroMax owner's manual.

Browse DuroMax generators & specs →

Procedure

1. Remove side service cover with 8mm socket wrench
2. Remove valve cover insulator (4 bolts) with socket wrench
3. Pull spark plug cap off
4. Unscrew spark plug with spark plug wrench
5. Visually inspect; recommend NGK BPR6ES; measure gap 0.7-0.8mm
6. Clean and re-gap if reusing
7. Reassemble generator

Source: DuroMax owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More DuroMax repair guides →