DuroMax XP11000iH — Changing the Oil
Maintenance · engine oil
For the DuroMax XP11000iH, from the DuroMax owner's manual.
Browse DuroMax generators & specs →
Before you start
- Worn out or dirty oil does not cool generator properly
Procedure
- Remove maintenance end cover opposite handle end with 8mm socket wrench
- Locate oil drain hose left of maintenance cover, pull hose out
- Pull out bottom kickstand, place drain hose on top
- Tilt generator forward onto kickstand
- Remove oil drain hose cap, drain oil into container
- Replace cap and level generator
- Remove oil cap and add new oil
Tools required
- 8mm socket wrench Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Source: DuroMax owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.