DuroMax XP10000HX — Storing the Generator for Longer Than 30 Days

Maintenance

For the DuroMax XP10000HX, from the DuroMax owner's manual.

Browse DuroMax generators & specs →

Procedure

1. Turn breaker OFF and run generator 3-5 minutes
2. Shut fuel valve OFF and run until engine stalls
3. Turn battery switch OFF
4. Empty the gas tank
5. Drain the carburetor via the drain bolt
6. Remove spark plug, add 2 tbsp of 10W-30 oil into the spark plug hole, pull recoil to lubricate cylinder, reinstall spark plug
7. Remove the battery and place on a 12V battery tender indoors

Source: DuroMax owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More DuroMax repair guides →