DuroMax XP10000HX — Spark Plug Maintenance
Maintenance · spark_plug
For the DuroMax XP10000HX, from the DuroMax owner's manual.
Browse DuroMax generators & specs →
Procedure
- Remove spark plug cap
- Unscrew spark plug with spark plug wrench
- Inspect plug, discard if cracked/chipped
- Measure gap with a gauge (0.7-0.8mm)
- Clean and re-gap if reusing
- Install spark plug
- Replace spark plug cap
Tools required
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Gap 0.7-0.8 mm (0.028-0.031 in)
Source: DuroMax owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.