Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›DuroMax›Changing/Inspecting the Carbon Brushes

DuroMax XP10000HX — Changing/Inspecting the Carbon Brushes

Repair & overhaul · alternator

For the DuroMax XP10000HX, from the DuroMax owner's manual.

Browse DuroMax generators & specs →

Before you start

  • Inspect every 250 running hours

Procedure

  1. Remove the 2 bolts of the generator cover, pull cover off
  2. Remove the bolt holding the carbon brush
  3. Remove the two wires from the AVR on the carbon brush
  4. Install new carbon brush with bolt
  5. Connect the 2 wires from the AVR, observing polarity
  6. Replace the back cover with the 2 bolts

Source: DuroMax owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More DuroMax repair guides →