DuroMax XP10000HX — Changing/Inspecting the AVR
Repair & overhaul · alternator
For the DuroMax XP10000HX, from the DuroMax owner's manual.
Browse DuroMax generators & specs →
Before you start
- AVR may be damaged by overheating or overloading
Procedure
- Remove the 2 bolts of the generator cover, pull cover off
- Remove the 2 bolts holding the AVR
- Disconnect the wire clip
- Remove the 2 wires from the AVR on the carbon brush
- Install the new AVR with the 2 bolts
- Reconnect the 2 wires to the brush, observing polarity
- Reconnect the AVR wire clip
- Replace the back cover with the 2 bolts
Source: DuroMax owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.