Doosan GE12TIC — Replacing oil filter cartridge
Maintenance · Lubrication system
For the Doosan GE12TIC, from the Doosan service manual.
Browse Doosan generators & specs →
Before you start
- Use DOOSAN genuine oil filter cartridge
Procedure
- Drain engine oil by hand pump and close drain pump valve.
- Loosen oil filter by turning counter-clockwise with filter wrench.
- Wipe clean the fitting face of filter body and oil filter body.
- Lightly oil the O-ring and turn oil filter until sealing face fits against O-ring.
- Turn 1-1/4 turns further with filter wrench.
Tools required
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Source: Doosan service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.