Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Forklift Truck Operating Checklist

Doosan — Forklift Truck Operating Checklist

A Doosan service procedure — check it applies to your exact model before use.

Browse Doosan generators & specs →

Before you start

  • Always follow the operation and maintenance Manual furnished with this lift truck.

Procedure

  1. Before starting machine, check all controls and warning devices for proper operation.
  2. Refer to machine identification plate for allowable machine capacity. Do not overload. Operate machines equipped with attachments as partially loaded machines when not handling a load.
  3. Put directional control or shift lever in neutral before "ON - OFF" switch is turned on.
  4. Start, turn and brake smoothly. Slow down for turns, slippery or uneven surfaces. Extremely poor surfaces should be repaired. Avoid running over loose objects or holes in the roadway surfaces. Use extreme caution when turning on inclines.
  5. Travel with load as low as possible and tilted back. If load interferes with visibility, travel with load trailing.
  6. On grade operations travel with load low.

Source: manual:Doosan D G GC Forklift Trucks Operating & Maintenance Manual PDF.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.