Doosan C185 / C185WKUB-T2 — Service the Air Cleaners

Maintenance

For the Doosan C185 / C185WKUB-T2, from the Doosan owner's manual.

Applies to: Kubota 2403T engine

Procedure

1. Loosen the 3 latches on the sides of the air cleaner cover.
2. Remove air cleaner body.
3. Pull out air cleaner element.
4. Pull out safety element if installed.
5. Install new filters in air cleaner body.
6. Re-install cover on air cleaner body.
7. Close the 3 latches after securing to air cleaner body.
8. Make sure all clamps and flange joints are tight.
9. Make sure the pre-cleaner dirt dump is pointed within 30 degrees of down.

Source: Doosan owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Doosan repair guides →