Doosan C185 / C185WKUB-T2 — Scavenge Line / Oil Carry-Over Maintenance
Maintenance
For the Doosan C185 / C185WKUB-T2, from the Doosan owner's manual.
Applies to: Kubota 2403T engine
Procedure
- Check oil level; maintain as indicated earlier in this section.
- Thoroughly clean scavenge line, any orifice and check valve.
- Assure minimum pressure valve/orifice is operational.
- Run unit at rated operating pressure for 30 to 40 minutes to permit element to clear itself.
Specs & values
- Once a year or every 1000 hours of operation, whichever comes first, replace separator element and clean the scavenge orifice/check valve
Source: Doosan owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.