Doosan C185 / C185WKUB-T2 — Oil Separator Element Replacement
Maintenance
For the Doosan C185 / C185WKUB-T2, from the Doosan owner's manual.
Applies to: Kubota 2403T engine
Procedure
- Ensure the tank pressure is zero.
- Unscrew separator element from manifold.
- Lubricate gasket with compressor oil.
- Install new element.
Specs & values
- Replace every twelve months or 1000 hours
Source: Doosan owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.