Doosan GE12TIC — Service procedure

For the Doosan GE12TIC.

Before you start

There is a rise of burns and scalding. Do not touch oil drain plug or oil filters
Accumulator acid is toxic and caustic. Battery gases are explosive.
the following points.

Procedure

Before performing service operation, disconnect the grounding cable from the
Use covers for preventing the components from damage or pollution.
Engine oil and anti-freeze solution must be handled with reasonable care as they
The use of proper tools and special tools where specified is important to efficient
Use genuine DOOSAN’s parts necessarily.
Used cotter pins, gaskets, O-rings, oil seals, lock washer and self-lock nuts
To facilitate proper and smooth reassemble operation, keep disassembled parts
Clean the parts before inspection or reassembly. Also clean oil ports, etc. using
Lubricate rotating and sliding faces of parts with oil or grease before installation.
When necessary, use a sealer on gaskets to prevent leakage.
Carefully observe all specifications for bolts and nuts torques.
When service operation is completed, make a final check to be sure service has

Source: manual:11L Manual.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.