Fast-Response II — Disassembly/Reassembly

For the Fast-Response II.

Procedure

1. 16. Thread studs into flywhee! as shown in Figure 6-75.
2. 1. Flywheel Studs
3. 17. Place hoist hooks into end bracket and adapter eye.
4. 1. Drive Discs 3. Spacers
5. 2. Studs
6. 18. Move generator as necessary to align adapter and

Source: manual:tp5149.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.