Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›DETROIT DIESEL 149 Assemble Blower Bypass Valve This procedure can be completed on the engine or on

Detroit Diesel 149 — DETROIT DIESEL 149 Assemble Blower Bypass Valve This procedure can be completed on the engine or on

For the Detroit Diesel 149.

Browse Detroit Diesel generators & specs →

Before you start

  • To alert serving personnel to

Procedure

  1. Load the piston assembly using Kent-Moore tool
  2. Place the spring in the housing, locating it correctly on
  3. With the retaining collar and nut at the top of tool
  4. Screw the threaded end securely into the piston.
  5. Turn the retaining collar nut until the cover is in place.
  6. Install the four cap screws into the cover and tighten to
  7. Unscrew the threaded rod from the piston and remove

Tools required

  • the tool in

Source: manual:detroit-diesel-149-workshop-manual-sections-3-thru-7-ab.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.