Detroit Diesel — Diesel Allison Service Outlet is properly equipped to
A Detroit Diesel service procedure — check it applies to your exact model before use.
Browse Detroit Diesel generators & specs →
Before you start
- NOTE: A galvanized steel tank should never be
- NOTE: In some instances, it may be necessary to
Procedure
- With the engine shut down, place a suitable
- Support the shell, unserew the cover nut and remove
- Remove and discard the element and gasket. Clean
- Place a new element, which has been thoroughly
- Affix a new shell gasket, place the shell and element
- Tighten the cover nut only enough to prevent fuel
- Remove the plug in the strainer or filter cover and
- Start and operate the engine and check the fuel
- Unscrew the filter (or strainer) and discard it.
- Fill a new filter replacement cartridge about two-
- Install the new filter assembly and tighten it to two-
- Start the engine and check for leaks.
- Fill the fuel tank with the recommended grade of
- Remove the fuel strainer shell and element from the
- Remove and fill the fuel filter shell and element
Source: manual:Inline 71 Series Detroit Diesel.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.