Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Temperature Sensor Installation

Detroit Diesel — Temperature Sensor Installation

A Detroit Diesel service procedure — check it applies to your exact model before use.

Browse Detroit Diesel generators & specs →

Before you start

  • Use lubricant (non-graphite based) if necessary when loosening sensor nut.

Procedure

  1. Place temperature sensor probe in ATD and tighten in place with temperature sensor nut; torque to 35-39 Nm (26-29 lb ft).
  2. Make electrical connection and slide white locking tab into lock position.
  3. Slide boot over temperature sensor connection.

Specs & torque values

  • Torque spec: 35-39 Nm (26-29 lb ft)

Source: manual:ats tech guide.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.