Home›Repair guides›Detroit Diesel›Restore Engine from Extended Storage

Detroit Diesel — Restore Engine from Extended Storage

Maintenance

From a Detroit Diesel operator's manual — check it applies to your exact model before use.

Procedure

  1. Remove covers and tape from all openings, fuel tank, electrical equipment.
  2. Wash exterior with fuel oil to remove rust preventive.
  3. Remove rust preventive from flywheel.
  4. Remove paper strips from between pulleys and belts.
  5. Drain preservative oil from crankcase; refill with recommended lubricating oil.
  6. Fill fuel tank with specified diesel fuel.
  7. Close drain cocks; fill cooling system with clean soft water and rust inhibitor; add antifreeze if freezing.
  8. Install and connect battery.
  9. Service air cleaner.
  10. Prepare power generator, marine gear, and Torqmatic converter as outlined.
  11. Start engine; check tune-up before applying load.

Source: Detroit Diesel operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Detroit Diesel repair guides →