Home›Repair guides›Detroit Diesel›Preliminary Inspection

Detroit Diesel — Preliminary Inspection

Testing & diagnosis · Diesel Particulate Filter (DPF)

From a Detroit Diesel service manual — check it applies to your exact model before use.

Procedure

  1. Using a clean white rag or shop cloth, reach inside the device and wipe the inside face of the DPF outlet section.
  2. Inspect rag for indications of soot.
  3. If soot is found, the ATD should be replaced; contact the Detroit Diesel Customer Support Center at 313-592-5800.
  4. If no soot is found, disassemble the ATD and continue the inspection process.

Tools required

  • Clean white rag or shop cloth Amazon

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Source: Detroit Diesel service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Detroit Diesel repair guides →