Detroit Diesel — Installation of the Air Compressor
Installation
From a Detroit Diesel service manual — check it applies to your exact model before use.
Before you start
- Using an incorrect (too long) bolt can push cup plugs into the gear train causing severe damage.
- Ensure O-rings and retainers are installed on both ends of the coolant lines.
Procedure
- Clean all foreign material from the mating surfaces of the air compressor and cylinder block.
- Install a new O-ring on the air compressor hub and a new O-ring on the oil supply.
- Install the air compressor on the cylinder block; torque the four bolts to 60 N·m.
- Install the coolant supply and return lines to the air compressor.
- Install the air lines to and from the air compressor.
- Fill the cooling system.
- Start the engine and check for leaks.
Specs & values
- Air compressor bolts: 60 N·m (44 lb·ft)
- Correct bolt length: 35 mm (1.37 in)
Source: Detroit Diesel service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.