Detroit Diesel — Installation of DPF

Repair & overhaul · Diesel Particulate Filter (DPF)

From a Detroit Diesel service manual — check it applies to your exact model before use.

Procedure

1. Remove and replace (with new) the graphite gaskets from the DPF prior to installation.
2. Place the DPF on the support, slide underneath the vehicle, and raise into position.
3. Position the support strap around the DPF and tighten to a snug fit.
4. Position the two V-bands onto the DPF and tighten; torque to 16-18 Nm (12-13 lb ft).
5. Lower the support and slide out from under the vehicle.
6. If necessary, lower vehicle and replace body panel(s) or other removed component.

Source: Detroit Diesel service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Detroit Diesel repair guides →