Detroit Diesel — Installation of Doser Block Assembly
Repair & overhaul
From a Detroit Diesel service manual — check it applies to your exact model before use.
Before you start
- It is very important that the proper connectors be plugged into the correct valves/sensors in order to avoid system malfunction.
Procedure
- Install Doser Block Assembly using three bolts; torque bolts to 30-38 Nm (22-28 lb ft).
- Plug in connectors to FCV, FLP Sensor, FCP Sensor, and EDV.
- Connect dosing fuel line.
- Connect fuel line.
- Connect fuel return line to fuel pressure regulator.
- Tighten all connections securely.
Tools required
- Torque wrench Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Source: Detroit Diesel service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.