Detroit Diesel — Install the camshaft gear on the camshaft
Repair & overhaul
From a Detroit Diesel service manual — check it applies to your exact model before use.
Applies to: Detroit Diesel Series 60 engine
Procedure
- Using a suitable press, support the camshaft securely; the bottom of the camshaft must be firmly secured to prevent movement.
- Install the camshaft gear into the camshaft gear cover and lower it as an assembly onto the nose of the camshaft.
- Align the key in the camshaft with the keyway in the camshaft gear.
- Gently press the gear all the way onto the camshaft until it bottoms and is fully seated on the camshaft.
Tools required
- Suitable press Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Full service-parts list: Detroit Diesel Series 60 engine →
Source: Detroit Diesel service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.