Home›Repair guides›Detroit Diesel›Engine Oil Level Check

Detroit Diesel — Engine Oil Level Check

Maintenance

From a Detroit Diesel service manual — check it applies to your exact model before use.

Applies to: Detroit Diesel Series 60 engine

Before you start

  • Touching a hot engine can cause serious burns.
  • Do not overfill. Oil may be blown out through the crankcase breather if the crankcase is overfilled.
  • Clean end of tube before removing the dipstick to prevent oil contamination.
  • If the oil level is constantly above normal and excess lube oil has not been added, consult an authorized Detroit Diesel service outlet; fuel or coolant dilution of lube oil can result in serious engine damage.

Procedure

  1. Check the oil level daily with the engine stopped.
  2. If the engine was just stopped and is warm, wait at least 10 minutes for oil to drain back to the oil pan.
  3. Wipe the dipstick clean, then check that the level is within the safe range on the dipstick.
  4. Add the proper grade of oil to maintain the correct level on the dipstick.
  5. To adjust level open the oil reserve tank valve and allow oil to discharge into the engine until FULL, then close the valve.

Specs & values

  • Oil Pan Capacity, Low Limit 26 quarts/25 liters
  • Oil Pan Capacity, High Limit 32 quarts/30 liters
  • Oil reserve tank 10 US qts (9.5 L)

Full service-parts list: Detroit Diesel Series 60 engine →

Source: Detroit Diesel service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Detroit Diesel repair guides →