Daewoo — Starting (pre-heating system)
Operation · Pre-heating system / glow plug
From a Daewoo operator's manual — check it applies to your exact model before use.
Before you start
- Do not actuate the starter for longer than 10 seconds. If starting fails regardless of the preheating, start the preheating again after 30 seconds.
Procedure
- Turn the key switch to the HEAT position; the pilot lamp lights up for about 15 seconds.
- When the pilot lamp is extinguished, turn the key switch to the START position to crank the engine at once.
- After the engine is cranked, convert the key switch to the ON position.
Tools required
- Key switch Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Pre-heating below 10 C coolant temperature
- After-heating 20 seconds
Source: Daewoo operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.