DAEWOO — Engine Lubrication Oil Change
For these DAEWOO models: DB33, PO34Ti.
Applies to: Daewoo DB33, Daewoo DB33 Engine, Daewoo PO34Ti, Daewoo PO34Ti Engine
Before you start
- B
- e
- c
- a
- r
- e
- f
- u
- l
- a
- b
- o
- u
- t
- t
- h
- e
- m
- i
- x
- i
- n
- g
- o
- f
- d
- u
- s
- t
- o
- r
- c
- o
- n
- t
- a
- m
- i
- n
- a
- t
- o
- r
- d
- u
- r
- i
- n
- g
- t
- h
- e
- s
- u
- p
- p
- l
- e
- m
- e
- n
- t
- o
- f
- o
- i
- l
- .
Procedure
- While the oil is still hot, remove the drain plugs from oil pan and oil filter head, and discharge the lubricating oil.
- Refill the lubricating oil in accordance with the oil capacity of the engine through oil filler. Be careful about the mixing of dust or contaminator during the supplement of oil. Then confirm that oil level gauge indicates the vicinity of its maximum level.
- For a few minutes, operate the engine at idling in order to circulate oil through lubrication system.
- Thereafter shut down the engine. After waiting for about 10 minutes measure the quantity of oil and refill the additional oil if necessary.
Specs & torque values
- Oil change interval: Every 50 hours of operation or 6 months
- Oil capacity: 7.5 max / 6.5 min liters (DB33), 6.5 max / 5.5 min liters (PO34Ti)
Source: manual:Daewoo DB33-PO34Ti Operational Manual 1999.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.