Daewoo — Coolant filling

Maintenance · Cooling system

From a Daewoo operator's manual — check it applies to your exact model before use.

Procedure

1. Close or tighten the coolant drain plugs.
2. Use clean water such as the city supply water as the coolant.
3. Fill up the tank with the coolant until the level comes up to the filler port neck; fill the coolant gradually to avoid air entry.
4. After the coolant have filled up, operate the engine about five minutes in low idle speed; the air contained in the coolant circuit is bled.
5. Stop the engine to replenish it with the coolant.

Source: Daewoo operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Daewoo repair guides →