Daewoo — Adjustment of Valve Clearances
Adjustments · Valve train
From a Daewoo operator's manual — check it applies to your exact model before use.
Procedure
- Bring the piston in either the No. 1 cylinder or the No. 4 cylinder to top dead center on the compression stroke by turning the crankshaft until the T.D.C notched line on the crankshaft pulley is alig
- Check to see if there is play in the No. 1 intake and exhaust valve rocker arms; if the No. 1 cylinder rocker arms are depressed, the No. 4 piston is at TDC on the compression stroke.
- Adjust the valve clearances of the cold engine.
Tools required
- Feeler gauge Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Intake valves: 0.4mm
- Exhaust valves: 0.4mm
Source: Daewoo operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.