Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Photo #7-07 - Belt Inspection

Cummins — Photo #7-07 - Belt Inspection

For these Cummins models: GTA14, GTA14 qi 20 NA.

Browse Cummins generators & specs →

Procedure

  1. 1. Loosen the lock nut that secures the idler pulley to the water pump.
  2. 2. Turn the adjusting screw to adjust the v-ribbed belt tension to 623 N (140 Ib.)
  3. 3. Rotate the crankshaft one revolution to allow the belt to stretch, and check the tension again.

Source: manual:Cummins Gas GTA14 Manual 1998 (2).pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.