Cummins/Onan — Time PLB Pump (DJA)
Adjustments · injection pump
From a Cummins/Onan service manual covering: 12.0MDJC-3CR, 12.0MDJF-53CR, 15.0MDJF-18R, 15.0MDJF-3CR, 3.0MDJA, 3.0MDJA-3CR, 3omDJaiR, 4.0MCCK-3CR, 6.0MDJE-518R, 6.0MDJE-53CR, 6.5MCCK-3CR, 6.OMDJE-S18R…. Check it applies to your exact model before use.
Applies to: Cummins/Onan 12.0MDJF-53CR, Cummins/Onan 15.0MDJF-3CR, Cummins/Onan 3.0MDJA, Cummins/Onan 6.0MDJE-518R, Cummins/Onan 6.0MDJE-53CR, Cummins/Onan 6.5MCCK-3CR
Procedure
- Install pump tappet in recess, position flywheel on port closing mark.
- Measure distance from mounting pad to tappet center.
- Subtract from 1.670-inch port closing dimension.
- Select correct shims and install pump.
Tools required
- depth micrometer Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- 1.670-inch port closing dimension
- 17° BTC
Full service-parts list: Cummins/Onan 12.0MDJF-53CR →, Cummins/Onan 15.0MDJF-3CR →, Cummins/Onan 3.0MDJA →, Cummins/Onan 6.0MDJE-518R →, Cummins/Onan 6.0MDJE-53CR →, Cummins/Onan 6.5MCCK-3CR →
Source: Cummins/Onan service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.